飞琼FPC热压焊机-PLC控制
SPECIFICATION 规格 | |
Diameter of cylinder: 气缸直径 Output force 出力 mm : N | 32:600
|
Range of temp 控制温度 ℃ | 0~450 |
Rate of temp.raising 升温速度 Nos | 1到9 |
Tolerance of temp.pressing 恒温精度 ±℃ | 2 |
Area of press 可压面积(参考) mm2 | 360 |
Air pressure 压缩气压 MPa | 0.060~0.600 |
Resoeution of programmable MPa Force accuracry 出力精度 | 0.001 ±2 |
Time of pressing 恒温时间 sec | 0~99 |
Flow rate of 真空装置 Vacuum 流量 L/min | 24 |
Power supply 电源 VAC | 220 |
Standard working 标准工作 Area(WxD) 面积(宽x深)mm | 150x200 |
Max. Working 最大工作 Area(WxD) 面积(宽x深)mm | 200x260 |
Positioning 对位方法 | 眼睛/镜头放大 |
Weight 重量 kg | 90 |
下一篇:飞琼多刀多组分板机